Find your ideal wheel at Escapa from a wide selection of top brands.
The Dt Swiss H 1900 Spline 12/148 SRAM XD 27.5 Rear Wheel is a mountain bike wheel that offers the perfect balance between durability and efficiency.
Since the introduction of the first generation of Dt Swiss Hybrid wheels, e-bikes, their users, and their range of uses have changed significantly. Not only have average riding forces increased significantly, but more powerful batteries have nearly doubled the average ride duration. As a result, modern e-bikes and their components must now prove themselves.
With the current line of Dt Swiss Hybrid wheels, the Swiss team at Dt Swiss has taken these developments into account and, drawing on their 27 years of experience, has adapted the e-bike-specific wheel series to handle higher loads. The H 1900 wheels offer you an affordable introduction to Dt Swiss Hybrid wheel sets without compromising on durability or reliability.
Robust rims
The insert-welded aluminum rims (sleeve-welding process) with their large 30-millimeter inner tire width offer excellent support at low air pressures. To be equipped for a maximum system weight of 150 kg (rider, luggage, and bike), the rims have been reinforced at critical points. In particular, the inner area around the spoke holes, which is crucial for power transmission, has been given increased wall thickness. Of course, the rim profile is designed for Tubeless use and comes with Tubeless tape and a matching Tubeless valve.
Dt Swiss 370 Hubs
To handle the higher drive forces of the E-MTB, the Dt Swiss 370 hub features a specially hardened steel cassette body. Its Ratchet LN pulley system distributes the combined power of the rider and the motor evenly, without load spikes, over more than 18 teeth per wheel revolution.
Dt Swiss Hybrid 1 Spokes
The Dt Swiss Hybrid 1 spokes were specially developed for use on E-MTBs. The straight-pull spokes have been reinforced, particularly at the spoke heads. With a maximum tensile strength that is 30% higher than that of conventional MTB spokes, they can better absorb higher drive and braking torques, thereby ensuring the wheels’ permanent lateral and torsional stiffness.
Pro Lock Technology
In the Pro Lock process, a patented two-component adhesive is injected into the nipple thread, enabling the construction of extremely durable wheelsets. As soon as the nipples are screwed in, the adhesive is activated and cures completely after approx. 6–7 hours at room temperature. Repeated centering remains possible without any issues, although the clamping force decreases slightly with each re-centering.
FEATURES:
NET WEIGHT [G] 1164.000
RECOMMENDED MAXIMUM SYSTEM WEIGHT 150 kg
ASTM CLASSIFICATION 4
RECOMMENDED FOR E-BIKES Yes (max. 32 km/h or max. 250 W)
MATERIAL Aluminum
TIRE INTERFACE Hooked / Crotchet Tubeless TC
WHEEL DIAMETER 584 mm (27.5" / 650B)
STICKER TYPE Waterslide
RIM HEIGHT 20 mm
INNER RIM WIDTH 35 mm
OUTER WIDTH 40 mm
HUB TYPE 370
AXLE SYSTEM 12 mm Thru Axle
WHEELBASE 148 mm Boost
BRAKE SYSTEM Disc IS (6-bolt)
HUB SRAM XD Steel (SSRAM)
CASSETTE INTERFACE SRAM XD
HUB TYPE Ratchet LN 18
LEFT-SIDE SPOKES Hybrid 1 straightpull
RIGHT-SIDE SPOKES DT Hybrid 1 straightpull
SPOKE PATTERN Three-cross (1:1)
NIPPLES DT ProLock Squorx ProHead aluminum
