Find a wide range of products for your bike at Escapa .
With the Bompar Tubeless Retreading Kit, you can retread your tire and save your ride. Without removing the Tubeless tire from the rim and in just 10 minutes, repair it and get back on the road!
Tire repair kit for tires with large cuts that puncture-proof patches cannot seal.
Rapido repair process (10 minutes).
External repair—no need to remove the wheel or tire.
Although this is a temporary fix, you can continue using the tire until it wears out.
Clean the cut in the tire thoroughly. There’s no need to remove the Tubeless tire from the rim. Shake the bottle of solution to thoroughly mix the three basic components of the repair compound. Apply a layer of vulcanizing solution to the cut and the area around it. Quickly sprinkle the rubber particles on top and let it dry for 3 minutes. Apply another layer of solution and rubber particles on top, then let it dry for another 3 minutes. If you think it’s necessary, repeat the process one more time to give the repair greater durability. You’re now ready to inflate your Tubeless tire to the proper pressure and start riding. Remember to use anti-puncture sealant in your tire; this will seal any small pores that may remain after the retreading. If your tire is wearing down normally and you feel it’s necessary to apply another layer, you can do so, even if months have passed since the first repair. It seals 100% of large cuts in all tires.
