Find the best Bosch components and accessories for your e-bike atEscapa. TheBosch 415mm Speed Sensor isessential for proper operation. It works similarly to a standard bicycle speedometer. The Bosch drive system always calculates the appropriate assistance based on the data it receives. Therefore, replace a damaged or defective speed sensor immediately.
Speed sensor for E-Bikes compatible with all Bosch drive systems from 2010 onward, except the Smart System
Available in various lengths from 415 mm to 1610 mm
100% accurate fit
Bosch SPEED SENSOR COMPATIBILITY
The speed sensor has been installed in Bosch e-bike motors since the first generation and can be found on all Bosch e-bikes up to the second generation. This speed sensor was also installed in the following two generations of drives, from 2018 and 2020. In addition, however, a new Bosch Slim speed sensor, the Speedsensor (BDU3xx, BDU4xx), was also developed and installed. For the 2022 model year, there is also a new Bosch Slim speed sensor for the Smart System. Therefore, when placing your order, be sure to check the model year of your e-bike and compare the different product images. If you’re unsure, our customer service team will be happy to assist you.
INSTALLING THE BOSCH SPEED SENSOR ON YOUR E-BIKE
To replace the speed sensor on your e-bike with a Classic Line motor, you must first remove the stone guard. It is attached to the motor housing with three screws. For Active and Performance motors, you’ll need to loosen the gear shifter crank using a crank puller. Next, remove the screws from the decorative cover on the motor housing and carefully remove the left side. The speed sensor connector should now be exposed in both cases. Carefully pull out the connector using needle-nose pliers. Be sure to avoid pulling directly on the cable. Now install your new Bosch speed sensor in reverse order.
Package Contents: 1x speed sensor
Compatibility: all e-bikes with Bosch Classic, Active, Performance, CX
Incompatibility: Not for Bosch Smart System motors
